VPG_ORIENTATION=Val_0x0, VPG_MODE=Val_0x0, VID_MODE_TYPE=Val_0x0
Video Mode Configuration Register
| VID_MODE_TYPE | This field indicates the video mode transmission type as follows: 0 (Val_0x0): Non-Burst with sync pulses 1 (Val_0x1): Non-Burst with sync events 2 (Val_0x2): Burst mode 3 (Val_0x3): Burst mode |
| LP_VSA_EN | When set to 1, this bit enables the return to low-power inside the VSA period when timing allows. |
| LP_VBP_EN | When set to 1, this bit enables the return to low-power inside the VBP period when timing allows. |
| LP_VFP_EN | When set to 1, this bit enables the return to low-power inside the VFP period when timing allows. |
| LP_VACT_EN | When set to 1, this bit enables the return to low-power inside the VACT period when timing allows. |
| LP_HBP_EN | When set to 1, this bit enables the return to low-power inside the HBP period when timing allows. |
| LP_HFP_EN | When set to 1, this bit enables the return to low-power inside the HFP period when timing allows. |
| FRAME_BTA_ACK_EN | When set to 1, this bit enables the request for an acknowledge response at the end of a frame. |
| LP_CMD_EN | When set to 1, this bit enables the command transmission only in low-power mode. |
| VPG_EN | When set to 1, this bit enables the video mode pattern generator. |
| VPG_MODE | This field is to select the pattern: 0 (Val_0x0): Horizontal or vertical 1 (Val_0x1): Vertical only |
| VPG_ORIENTATION | This field indicates the color bar orientation as follows: 0 (Val_0x0): Vertical mode 1 (Val_0x1): Horizontal mode |